IBM Power 11 Network card

Power 11 EC86: 2-port 200 GbE NIC and RoCE SR/Cu PCIe5 x16, no crypto, LP capable adapter (full height)

EC86 is IBM's 2-port 200 GbE NIC and RoCE SR/Cu PCIe5 x16, no crypto, LP capable adapter (full height). Listed for 9824-42A, 9043-MRU.

A full height network card with two 200 Gb ports, the first PCIe Gen5 card for Power11.

EC86 at a glance

DetailValue
Feature codeEC86
Name2-port 200 GbE NIC and RoCE SR/Cu PCIe5 x16, no crypto, LP capable adapter (full height)
Part typeNetwork card
Ports2
Speed200 GbE
PCIePCIe5 x16
Form factorfull height
CCINEC2C
Other height versionEC85
Listed for these Power 11 machine types9824-42A, 9043-MRU
Runs with IBM iYes ... IBM i 7.6, 7.5 TR 6 and 7.4 TR 12 support it (dedicated, SR-IOV, vNIC through VIOS). Not for IBM i on the E1150.

SG24-8587 lists only the low profile EC85 for the E1180 and marks its OS support not available at the time of writing.

Must plug into a system unit slot, not an I/O expansion drawer, because it needs Gen5. Requires FW1110 and HMC 11.1.1110. E1150 FRU 03HD082.

Before you order EC86

Network cards come in two heights. Low profile cards fit the shorter 2U servers. Full height cards fit the taller 4U servers. If a card has a twin code, the twin is the same card in the other height.

Not sure which Power 11 you have? The Power 11 machine types page shows how to check. Collecting several parts for one quote? Use the Power 11 quote checklist. Or look up another feature code.

Source: IBM Power11 Scale-Out Servers: Introduction and Overview (SG24-8590-00), Table 3-18; IBM Power E1150 Introduction and Technical Overview (SG24-8589-00), Table 3-11; IBM i I/O Support Details. Always confirm against your server's own configuration before you order.